Wi-Fi cameras have revolutionized home security, but they have one obvious limitation—they require a Wi-Fi connection to function. If you need to put a camera in a location your Wi-Fi network just can’t reach, or if you’d like to install a security camera in your RV, vacation home, or some other spot where you don’t want to pay for full-time broadband access just to support a camera, you’ll want to take a look at Netgear’s Arlo Go.
The company’s latest DIY security camera cosmetically resembles its predecessors, but it has one significant difference under the hood: a cellular modem that connects via 3G and 4G LTE networks. That means it will connect even out in the sticks–as long as you have cellular coverage; specifically, a data plan with Verizon, the only provider Arlo Go currently supports.
If you’re not a Verizon subscriber, you can you can use the camera with Netgear’s Arlo Mobile service. Arlo Go comes pre-activated with 15 minutes worth of recording time so you can use the camera right out of the box. Once you reach that limit, you can sign up for one of Arlo Mobile’s three service plans for uploading 30-second video clips: $3.99 per month for one 30-second clip per day (or 30 clips per month), $18.39 for eight clips per day (240 per month), or $26.39 for 15 clips (450 per month). Those are for service plans that are billed annually. Opt for pay-as-you-go and the three plans cost $4.99, $22.99, and $32.99 per month respectively.
Arlo Go’s design is similar to the Arlo Pro, a white pod-like body with a flat black face, though it’s bigger and more than twice as heavy. That’s largely due to the hefty 3660mAh rechargeable battery that powers it. You can also plug the Arlo Go into electrical power with the supplied weatherproof cord if you have a convenient outdoor outlet. Netgear also sells a solar panel that will trickle charge the battery.
The camera has a 130-degree field of view and streams 720p live video. An 8x digital zoom gets you up close to your subject, whether it’s a home intruder or a coyote prowling the edge of your property. Motion and sound detection use the same Mode-based control as the Arlo Pro with email alerts and push notifications. A built-in mic and speaker let you communicate with family members or scare off encroachers
Arlo Go is rated IP65—meaning it’s completely protected from dust and has decent protection from water—and has an operating temperature of -4 degrees to 113 degrees F. The lens is flanked by 850nm LEDs that provide up to 25 feet of night vision. You can turn these off if you’re using the camera for hunting or spying wildlife around your home, and Arlo even offers color, camouflage, and ghillie silicone skins ($20, $25, and $35 a pair respectively) to conceal the camera outdoors.
Video is recorded locally to a microSD card—a new feature for Arlo cameras—but you still get Arlo’s seven-day cloud storage free for up to five cameras. If you need more, you can upgrade to the Premier Plan (30 days for up to 10 cameras) for $10 per month or $100 per year, or the Elite Plan (60 days for up to 15 cameras) for $115 per month or $150 per year.
Setup and usage
Netgear’s cameras have typically been easy to install, and Arlo Go is no exception. You just pop in the battery and a microSD card (not included) if you want to record video locally, download and sign into the app, and follow the prompts to sync the camera. You can sit the camera on any flat surface or mount it to a wall, fence, tree, or other permanent spot with the included metal mount and screws.
The camera has fantastic image quality. Even on the “optimized” setting, which balances picture quality with battery life, Arlo Go displayed rich accurate colors and crisp detail. Bright areas like the light streaming in a side window of my living room were blown out with the out-of the-box settings, but I was able to tone them down with the brightness control. The lens produced only the slightest bit of fisheye distortion.
Night Vision provided excellent illumination and good contrast. It was plenty to light up my small yard, which is shrouded by an old acacia tree and faces a street with just one streetlight a couple houses down.
Arlo Go’s live feed displays on the app’s Device screen along with those of any other Arlo cameras you have installed. Tapping the feed takes you its dedicated screen. Along the top here are indicators for motion and sound detection, battery charge, and cell-signal strength. At the bottom are all the camera controls, including a record button, brightness settings, and mic and speaker toggles.
Arlo Go comes with four preset modes that should be familiar Arlo Pro users:
- Armed: When motion is detected, Arlo Go will record 10 seconds of video and alert you via push notification and email.
- Disarmed:Motion and sound detection are deactivated.
- Schedule The camera automatically arms and disarms according to a schedule you set. You can set several active periods for each day and even bridge calendar days.
- Geofencing: The camera automatically arms and disarms according to your location.